www.williamsequipment.com
|
Patching & Repair Mortars |
www.williamsequipment.com |
| Click here to go back to Supply Home |
| Acryl 60 |
 |
| An acrylic-polymer emulsion that is mixed with portland cement mortars, plasters, stucco, and concrete mixes. Acryl® 60 improves the adhesion, cohesion, tensile, compressive, and flexural strengths of these cement-based materials. This nonyellowing, water-base material is suitable for applications interior and exterior, above and below grade. Acryl® 60 produces a hard, strong, and fast cure for a wide variety of concrete-repair and cement-based coating materials. |
| Click here for Acryl 60 Product Data |
| Click here for Acryl 60 MSDS information |
| Waterplug |
 |
| Waterplug® is a one-component, quick-setting, Portland-cement-based hydraulic repair mortar that instantly stops running water through holes or cracks in concrete or masonry. It expands as it sets to lock into place even under constant water pressure. It conforms to NSF Standard 61 for Drinking Water System Components. |
| Click here for Waterplug Product Data |
| Click here for Waterplug MSDS information |
| Thoropatch |
 |
| Thoropatch® is a two-component, polymer-modified, Portland-cement-based repair mortar. Applied to horizontal surfaces, it gains strength quickly and has excellent chemical and wear resistance. |
| Click here for Thoropatch Product Data |
| Click here for Thoropatch MSDS information (Part 1) |
| Click here for Thoropatch MSDS information (Part 2) |
| Thorobond |
 |
| Thorobond® is a water-based, surface-applied polyvinyl acetate bonding agent. Apply it by brush, roller, or spray to masonry, gypsum plaster, concrete, and wallboard before topping with plaster or concrete mortar. |
| Click here for Thorobond Product Data |
| Click here for Thorobond MSDS information |
| Emaco R300 |
 |
| Emaco® R300 CI repair mortar is a one-component thixotropic polymer-modified cement-based profiling mortar with an integral corrosion inhibitor. Emaco® R300 CI is used for leveling or resurfacing distressed concrete both interior and exterior. It is shrinkage compensated, fast setting, and chloride and carbon resistant. |
| Click here for Emaco R300 Product Data |
| Click here for Emaco R300 MSDS information |
| Emaco R310 |
 |
| Emaco® R310 CI repair mortar is a polymer-modified cement-based mortar with an integral corrosion inhibitor. It is used for patching or resurfacing distressed horizontal concrete surfaces. Emaco® R310 CI repair mortar is designed for both interior and exterior use. |
| Click here for Emaco R310 Product Data |
| Click here for Emaco R310 MSDS information |
| Emaco R350 |
 |
| Emaco® R350 CI is a one-component low-density, polymer-modified renovation mortar that contains an integral corrosion inhibitor. It is ideally suited for patching and resurfacing distressed concrete. Its lightweight nature allows for excellent build without sagging. Emaco® R350 CI repair mortar can be used both interior and exterior. |
| Click here for Emaco R350 Product Data |
| Click here for Emaco R350 MSDS information |
| Emaco T430 |
 |
| Emaco® T430 repair mortar is a one-component high-performance cementitious product. It produces high early strengths at a wide range of temperatures and can be placed into service for standard rubber-tire traffic in as little as 6 hours. Emaco® T430 is specially suited for hot-weather applications when an extended working time is required. |
| Click here for Emaco T430 Product Data |
| Click here for Emaco T430 MSDS information |
| Thorocrete |
 |
| Thorocrete® Light Duty Patch is a one-component Portland-cement-based repair mortar for small to medium size repairs on horizontal surfaces. |
| Click here for Thorocrete Product Data |
| Click here for Thorocrete MSDS information |
| Mastertop® Topping 112 |
 |
| Mastertop® Topping 112 is a polymer-modified cement-based topping. It is ideally suited for leveling or resurfacing distressed concrete floors. |
| Click here for Mastertop Topping 112 Product Data |
| Click here for Mastertop Topping 112 MSDS |
| Emaco® S66 CI |
 |
| Emaco® S66 CI is a rheoplastic, pourable, shrinkage-compensated repair concrete. It has a unique formulation that provides excellent bond, resistance to sulfates and chlorides, high electrical resistivity, low permeability, high-compressive strengths, and protection from corrosion. |
| Click here for Emaco S66 CI Product Data |
| Click here for Emaco S66 CI MSDS |
| Set® 45 and Set® 45 HW |
 |
| Set® 45 is a one-component magnesium phosphate-based patching and repair mortar. This concrete repair and anchoring material sets in approximately 15 minutes and takes rubber-tire traffic in 45 minutes. It comes in two formulations: Set® 45 Regular for ambient temperatures below 85° F (29° C) and Set® 45 Hot Weather for ambient temperatures ranging from 85 to 100° F (29 to 38° C). |
| Click here for Set 45 Product Data |
| Click here for Set 45 MSDS |
| Click here for Set 45 Hot Weather MSDS |
| Thorite® General Purpose |
 |
| Thorite® General Purpose is a fast-setting, nonsag cement-based repair mortar for small repairs on vertical, horizontal, and overhead surfaces. |
| Click here for Thorite Producat Data |
| Click here for Thorite MSDS |
| Masterflow® 713 Plus |
 |
| Masterflow® 713 Plus is a cement-based grout with specially graded mineral aggregates. It can be used at any consistency from fluid to damp pack for applications that require precision support and early form stripping or shoulder trimming. Where early form removal is not required but extended working time is needed, use Masterflow® 928. Masterflow® 713 Plus meets all of the requirements of CRD-C 621, Grades B and C, Corps of Engineers Specification for Nonshrink Grout and ASTM C 1107, Grades B and C. |
| Click here for Masterflow 713 Plus Product Data |
| Click here for Masterflow 713 Plus MSDS |
| Conspec Special Patch |
| A polymer-modified cementitious two-component concrete repair mortar for use in thin and thick-section concrete patching and overlays. Special Patch provides excellent freeze-thaw resistance, superior adhesion and resistance against the penetration of deicing salts and other contaminants. Ideal for repairing interior warehouse slabs or exterior concrete pavements. |
| Click here for Conspec Special Patch Product Data |
| Click here for Conspec Special Patch MSDS |
| Por-Rok |
| Nonshrink gypsum cement anchor for interior applications or well-protected exterior applications. In a ready-to-use formulation, POR-ROK achieves a compressive strength in excess of 62 MPa (9,000 psi). Initial set occurs in 15 minutes and a final set in 45 minutes. |
| Click here to download Por-Rock Product Specs |
| Click here to download Por-Rock MSDS |
| All-Patch |
| Conspec All Patch is a single component, cement based, polymer modified, patching and repair product for any maintenance and new construction projects. All Patch can be applied from featheredge to 1 inch(2.5 cm) per lift. All Patch can be used for horizontal, vertical and overhead surfaces. |
| Click here to download All-Patch Product Specs |
| Click here to download All-Patch MSDS information |
| Rub Crete |
| Rub Crete is a one-part, polymer modified material specially formulated for rubbing, smoothing, resurfacing, repairing and restoring concrete surfaces. Rub Crete is designed with a chemical additive to ensure superior bonding characteristics. |
| Click here to download Rub Crete Product Specs |
| Click here to download Rub Crete MSDS information |
 |