Water & Dam Proofing
www.williamsequipment.com
 

Click here to go back to Supply Home
 
Hydrocide 700
Hydrocide® 600, 700 and 700B are cold-applied water-based emulsified-asphalt dampproofing and vapor-retarding coatings for use on "green" or slightly damp surfaces. Hydrocide® 600 is fiber-free for application by brush or spray. Hydrocide® 700 is reinforced with long fibers for application by trowel. Hydrocide® 700B is reinforced with short fibers for application by brush or spray.
-----
Click here for Hydrocide 700 Product Data
Click here for Hydrocide 700 MSDS
-----
Thoroseal
A portland-cement-based waterproof coating for concrete and masonry. Thoroseal® resists both positive and negative hydrostatic pressure, enabling it to waterproof both interior and exterior surfaces. It fills and seals pores and voids, correcting surface irregularities and eliminating the need for concrete rubbing. Thoroseal® creates a low-cost, low-maintenance, highly durable water barrier that is resistant to damage from impact, abrasion, and mildew. It can be overcoated with a variety of Thoro® decorative finishes.
 
Click here for Thoroseal Product Data
Click here for Thoroseal MSDS information
----
HLM 5000
HLM 5000® is a one-component, moisture-curing, bitumen-modified polyurethane elastomeric waterproofing membrane for exterior below-grade or between-slab applications. It is available in 4 grades for application by trowel, squeegee, roller, and spray. HLM 5000® comes in a variety of grades for different applications: HLM 5000® SL (self-leveling) is formulated for application by squeegee to horizontal areas. HLM 5000® T (trowel) is formulated for application by trowel to vertical surfaces. HLM 5000® S (spray) is a specially formulated version of 5000T for spray application. HLM 5000® R (roller) is formulated for application by roller to vertical and some horizontal surfaces.
 
Click here for HLM 5000 Product Data
Click here for HLM 5000 MSDS information